fbpx

The Babe’s philosophy

Home Forums Carving thoughts, questions & feedback! The Babe’s philosophy

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #100008007
    AvatarKevin Weaver
    Participant

    Following up on Marty’s question in the last e-newsletter about the Babe’s philosophy on learning I wanted to share the following thoughts…

    well you just can’t argue with the Babe, there is always something new to learn.  From my perspective, being a lifelong learner can help people enjoy a rewarding and fulfilling life.

    In keeping with the Babe’s thinking, over the holidays I had the opportunity to work on a new couple pieces that allowed me to practice some new skills, (like OWS chip carving, and some painting / finishing techniques) along with practicing my curves and lettering.  This actually required a bit of a shift in thinking in that when starting each piece I had to approach it from the perspective that I wasn’t doing the piece so much from the goal of having a real nice finished piece, but rather, it was a learning opportunity I was working on to build my confidence and skills.  So if it all turned out well and I ended up with a nice finished piece, great.  But if I botched the piece but learned something from it, no problem as there’s always the wood-stove for putting the piece to good use.  The important thing was to try out the new techniques and develop my skills.

    Whether it was because taking that approach took some pressure (tension) off while I was carving, or my skills are getting better, or more perhaps a combination, I can’t say for sure.  Regardless not only did I practice some skills but the two pieces I worked on I think the two pieces turned out rather good.

    I will post a couple images of both for you to have a look at.

    In the dragon piece I am really happy with the improved quality of my curves with very little chatter and no chip out!  What I learned from this piece was the benefit of using a swivel and honing the know frequently when carving curves.  You may notice a bit of a scratch above the dragon’s head.  Even that was a learning opportunity: when trying to stifle a sneeze remove the knife from the wood.  Personally I think the scratch adds a bit of character.

    Now with the Amaziograph Trivet pattern I thought placing a tea pot on it didn’t do it justice and it should be displayed on a wall properly.  However, as OWS is a new style of chip carving for me I wasn’t willing to try doing the piece, right out of the gates, on a good quality piece so I decided to try carving this one on an old basswood plank I found from among my supplies.  Well shortly into carving the piece I realized the quality of the wood was worse than I thought with discoloration from a couple knots affecting a large section of the piece and making the grain more unpredictable for carving particularly with some of the short grain cuts for the fans in the pattern.  Despite some minor chip-out along the ridges of a couple fans I think the piece turned out surprisingly good.  However I wasn’t really satisfied with the look because of the discoloration and knots still visible in the finished carving.  So I decided to try out some painting techniques with a combination of gel stains and acrylics.

     

    Overall, I am really pleased with the final results, despite my color choices being a bit more “Christmasy” looking than I was aiming  for, and I will have no problem displaying this piece on my office wall with pride.

    I will post some pictures for you to have a look at and am always interested in thoughts and recommendations.

    So that is my long winded answer to your question about the Babe’s philosophy and an example of how I try to live it.

    #100008008
    AvatarKevin Weaver
    Participant

    Dragon

    #100008009
    AvatarKevin Weaver
    Participant

    Trivet

    #100008622
    David BassDavid Bass
    Participant

    Kevin,

    INSPIRTUS is awesome!

    And I really like your choice of wood.

    David

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.