fbpx

Dry Wood?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #100016159
    Diana
    Participant

    So, I have an issue with getting chips out of my practice board. Every time I cut it comes out in pieces doesn’t matter if against or with the grain. I am wondering if my wood is too dry to carve and if so is there a way to get moisture back into the wood? That is the only thought I have about it. I keep my wood out in the garage where I do practice most times but watching the videos while trying to learn I have to do it in my room. Any suggestions would be helpful.

    Thanks

    Didi

    #100016167
    Marty Leenhouts
    Keymaster

    Hi Didi,

    You can increase the moisture content in wood if need be. Go back to the Forums page and you’ll see several posts about “moisture content”. Those will help you.

    if you have other questions you can post them there.

    Marty

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.