fbpx
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
product
carving_patterns
Search in posts
aiovg_videos
Search in pages

Can EZBoard be planed down?

Home › Forums › Wood preparation › Can EZBoard be planed down?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 12, 2020 at 10:55 am #100013194
    Laurajb
    Participant

    I have some EZBoard that I did some practice on.  I was wondering if you can plane it down, then put a design on it to make some small ornaments?

    Thank you.

    Laura

    August 13, 2020 at 2:37 pm #100013217
    Marty Leenhouts
    Keymaster

    Hi Laura,

    Yes, you can plane or sand down EZboard to whatever thickness you want.
    If planing you need really sharp blades. Sanding is easier and quite fast.

     

    August 13, 2020 at 6:01 pm #100013222
    Laurajb
    Participant

    Thank you.  I wasn’t sure and didn’t want to try it.  Didn’t want pieces and parts flying everywhere.

     

    Laura

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.